- Industrial Bearings Solutions
- Industrial Plain Bearings Roller Bearing Bearings Authorized Distributor
English
العربية
Deutsch
Ελληνικά
Español
Français
Bahasa Indonesia
Italiano
日本語
Português
Русский язык
Shqip
Svenska
ไทย
Türkçe
Українська
- Address05 Stanley Street Central Hongkong
- Factory Address05 Stanley Street Central Hongkong
- Worktime9:00-18:00 pm
- Phone(Working Time)+852(3)1591338
Taper Bearing Sets TIMKEN
Contact NowTapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.
The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.
This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.
The rollers are stabilized and restrained by a flange on the inner ring, against which their large end slides, which stops the rollers from popping out due to the "pumpkin seed effect" of their conical shape.
The larger the half angles of these cones the larger the axial force that the bearing can sustain.
Tapered roller bearings are separable into a cone assembly and a cup. The non-separable cone assembly consists of the inner ring, the rollers, and a cage that retains & evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|---|---|---|---|
| 30210-92KA1 Tapered Roller Bearing | 1 pcs | Negotiable | - | - |
| NA-99600 Tapered Roller Bearing | 1 pcs | Negotiable | - | - |
| 759 Tapered Roller Bearing | 1 pcs | Negotiable | - | - |
| SNR 31305V Tapered Roller Bearing | 1 pcs | Negotiable | - | - |
| TAPERED ROLLER BEARING 759 3 0000 | 1 pcs | Negotiable | - | - |
| 47890 Tapered Roller Bearing 3-5/8" Bore | 1 pcs | Negotiable | - | - |
| B7196-D Tapered Roller Bearing | 1 pcs | Negotiable | - | - |
| 4T-14130 Taper roller Bearing | 1 pcs | Negotiable | - | - |
| 32036X Tapered Roller Bearing 180mm x 280mm x 64mm | 1 pcs | Negotiable | - | - |
| TAPERED ROLLER BEARING CUP LM814810 | 1 pcs | Negotiable | - | - |
| 46720 Tapered Roller Bearing Cup ! NOP ! | 1 pcs | Negotiable | - | - |
| 23420 Tapered Roller Bearing | 1 pcs | Negotiable | - | - |